[ EXECUTIVE ORDER NO. 142, October 14, 2013 ]
IMPLEMENTING THE MEMORANDUM OF UNDERSTANDING (MOU) AMONG THE GOVERNMENTS OF THE PARTICIPATING MEMBER STATES OF THE ASSOCIATION OF SOUTHEAST ASIAN NATIONS (ASEAN) ON THE SECOND PILOT PROJECT FOR THE IMPLEMENTATION OF A REGIONAL SELF-CERTIFICATION SYSTEM ( SECOND PILOT PROJECT )
WHEREAS , the Rules of Origin (ROO) play a crucial role in the achievement of a free flow of goods within the ASEAN single market;
WHEREAS , the ASEAN Trade in Goods Agreement (ATIGA), which was signed on 26 February 2009 in Cha-am, Thailand, and entered into force on 17 May 2010, provides for a framework to realize the free flow of goods in the region;
WHEREAS , Article 38 and Annexes 7 and 8 of ATIGA provide for the relevant modalities and procedures for the application of the preferential treatment to goods falling within the ASEAN Free Trade Area (AFTA);
WHEREAS , Executive Order (EO) No. 850 (s. 2009), which was issued to implement tariff reduction/elimination commitments in accordance with the obligations under Articles 19 and 21 of ATIGA, requires compliance with the applicable ATIGA ROO and its Operational Certification Procedure (OCP), including the submission of a valid Certificate of Origin (Form D), in order to avail of preferential tariff rates under ATIGA;
WHEREAS , the initiative to adopt a self-certification scheme in ASEAN emanated from the decision of the 22 ndAFTA Council Meeting in August 2008 to develop mechanisms that will enhance the AFTA ROO and streamline certification procedures in line with the AEC Blueprint;
WHEREAS , pursuant to the Work Plan for the Development and Operationalization of an ASEAN Self-Certification Regime, endorsed by the 23rd AFTA Council Meeting, the MOU on the First Pilot Project was signed on 30 August 2010 by Brunei Darussalam, Malaysia and Singapore;
WHEREAS , following the decision of the 25th AFTA Council Meeting in August 2011 to allow other ASEAN Member States to have their own self-certification pilot project under a set of rules and conditions different from the First Pilot Project, the MOU on the Second Pilot Project was signed on 29 August 2012 by the Philippines, Indonesia and Lao People s Democratic Republic;
WHEREAS , the President of the Philippines ratified the MOU on the Second Pilot Project on 14 March 2013; and,
WHEREAS , during its meeting on 26 June 2013, the NEDA Board approved the Philippine implementation of the MOU on the Second Pilot Project.
NOW, THEREFORE, I, BENIGNO S. AQUINO III , President of the Philippines, by virtue of the powers vested in me by law, do hereby order:
SECTION 1. Objective. The MOU on the Second Pilot Project, which is attached as an integral part of this Order, aims to implement a regional self-certification system within the AFTA, in preparation for the development and operationalization of an ASEAN-wide Self-Certification System by 2015.
SECTION 2. Self-Certification Scheme. Under the self-certification scheme, there shall be no need to present a Certificate of Origin (Form D) in claiming tariff preferences as it allows Certified Exporters to self-declare that their products have satisfied the ATIGA ROO by making such declaration on the commercial invoice.
SECTION 3. Procedural Arrangements. The MOU on the Second Pilot Project shall be implemented according to the modalities set out in its Annex.
SECTION 4. Obligations. Throughout the implementation of the MOU on the Second Pilot Project, the Philippines shall accord to goods originating from other participating Member States the preferential tariff treatment set out in Article 19 of ATIGA, upon the submission of either a Certificate of Origin (Form D), or an Invoice Declaration made by a Certified Exporter in accordance with the Annex of the MOU on the Second Pilot Project and the regulations of the Bureau of Customs (BOC).
SECTION 5. Implementing Agency. The BOC shall be the implementing agency for the MOU on the Second Pilot Project, and shall perform the following functions:
a. Grant, suspend or revoke the status of Certified Exporters, subject to the qualifications/criteria/conditions it may impose;
b. Monitor the proper use of the Certified Exporters status, including the verification of the authenticity and validity of the Invoice Declarations made;
c. Monitor compliance of Certified Exporters with the laws, rules and regulations pertinent to exportation and importation; and
d. Perform other appropriate functions consistent with the implementation of the MOU on the Second Pilot Project.
A Customs Administrative Order shall be issued by BOC for this purpose after consultations with relevant stakeholders.
SECTION 6. Repealing Clause. All issuances, orders, rules and regulations, or parts thereof, which are inconsistent with this Order are hereby repealed, amended or modified accordingly.
SECTION 7. Separability Clause. If any provision of this Order is declared invalid or unconstitutional, the other provisions not affected thereby shall remain valid and subsisting.
SECTION 8. Effectivity Clause. This Order shall take effect immediately upon publication in a newspaper of general circulation and shall remain in force until the termination of the MOU on the Second Pilot Project.
DONE , in the City of Manila, this 14th of October, in the year of our Lord, Two Thousand and Thirteen.
(Sgd.) BENIGNO S. AQUINO III
By the President:
(Sgd.) PAQUITO N. OCHOA, JR.
Executive Secretary
MEMORANDUM OF UNDERSTANDING
AMONG THE GOVERNMENTS OF
THE PARTICIPATING MEMBER STATES OF
THE ASSOCIATION OF SOUTHEAST ASIAN NATIONS
(ASEAN) ON THE SECOND PILOT PROJECT FOR THE
IMPLEMENTATION OF A REGIONAL SELF-CERTIFICATION SYSTEM
The. Governments of the Republic of Indonesia, the Lao People s Democratic Republic (Lao PDR), and the Republic of the Philippines:
RECALLING the Leaders decision to establish an ASEAN Economic Community (AEC) by 2015 and the adoption of the AEC Blueprint at the 13ih ASEAN Summit on 20 November 2007, and that the ASEAN Community will establish ASEAN as a single market and production base, making ASEAN more dynamic and competitive, as an economic region in which there is a free flow of goods, services, investment and a freer flow of capital, equitable economic development and reduced poverty and socio-economic disparities;
RECOGNISING the crucial role that rules of origin (ROO) play in the achievement of a free flow of goods within the ASEAN single market;
CONSCIOUS of the agreed objective of putting in, place ROO which are responsive to the dynamic changes in global production processes so as to facilitate trade and investment among ASEAN Member States, promote a regional production network, encourage development of Small and Medium Enterprises and the narrowing of development gaps and promote the increased usage of the Common Effective Preferential Tariff Scheme for the ASEAN Free Trade Area (CEPT-AFTA), as established under the AEC Blueprint;
RECALLING that, to meet this objective, the Leaders agreed to simplify the Operational Certification Procedures (OCP) for the ASEAN ROO and to ensure its continuous enhancement, including the introduction of facilitative processes such as the electronic processing of certificates of origin and the harmonisation or alignment of national procedures to the extent possible;
AGREEING that the ASEAN Trade in Goods Agreement (hereinafter referred to as the Agreement or ATIGA ) which was signed on 26 February 2009 in Cha-am, Thailand, and entered into force on 17 May 2010, provides for the most comprehensive framework to realise the free flow of goods in the region;
RECALLING that Article 38 and Annexes 7 and 8 of the Agreement provide for the relevant modalities and procedures for the application of the preferential tariff treatment to goods falling within the AFTA; and
RECOGNISING the need to streamline the ROO procedures to facilitate the trade of ASEAN originating goods, including the introduction of a regional self-certification scheme, in line with the objectives of the AEC Blueprint as discussed at the 22nd and.25th AFTA Council Meetings, and by the High Level Task Force on Economic Integration, the Senior Economic Officials Meeting (SEOM), the Coordinating Committee on the Implementation of the ATIGA (CCA) and the Sub-Committee on ATIGA Rules of Origin (SC-AROO);
HAVE DECIDED to enter into a Memorandum of Understanding (MOU) for the purpose of introducing a second pilot project for the implementation of a regional self-certification system ahead of the adoption of such system by all Member States.
Article 1
Definitions
For the purpose of this MOU:
1. ASEAN means the Association of Southeast Asian Nations, which comprises Brunei Darussalam, the Kingdom of Cambodia, the Republic of Indonesia, Lao PDR, Malaysia, the Union of Myanmar, the Republic of the Philippines, the Republic of Singapore, the Kingdom of Thailand and the Socialist Republic of Viet Nam;
2. Participating Member States are the Member States that have agreed to participate in the second pilot project for the implementation of a regional self-certification scheme;
3. Exporter means a natural or juridical person located in the territory of a Participating Member State where a good is exported from by such a person;
4. Importer means a natural or juridical person located in the territory of a Participating Member State where a good is imported into by such a person;
5. Certified Exporter means a producer duly authorized to make out invoice declarations on the origin of a good exported;
6. Invoice Declaration means a declaration as to the origin of the goods exported made by a certified exporter on an invoice, in accordance with Rule 12B of the Annex of this MOU; and
7. Certificate of Origin means the Certificate of Origin (Form D) under Article 38 and Annex 7 of the Agreement.
Article 2
General Provisions
1. The Participating Member States agree, to introduce a second pilot project for the implementation of a regional self-certification system within the AFTA.
2. Other ASEAN Member States may apply to become a Participating Member State at any time, subject to Article 9 of this MOU.
Article 3
Obligations of the Participating Member States
Throughout the second pilot project, Participating Member States shall accord to goods originating in the other Participating Member States the preferential tariff treatment set out in Article 19 of the Agreement, upon submission of either:
(a) a Certificate of Origin (Form D); or
(b) an Invoice Declaration made out by a Certified Exporter, according to the procedures set out in the Annex of this MOU.
Article 4
Procedural Arrangements
Participating Member States agree that the second pilot project will be carried out according to the modalities and the procedures set forth in the Annex of this MOU.
Article 5
Suspension
Each Participating Member State reserves the right for reasons of national security, national interest, public order or public health to suspend temporarily, either in whole or in part, the implementation of this MOU. Such suspension shall take effect immediately after a written notification has been given to the other Participating Member States through diplomatic channels or the ASEAN Secretariat.
Article 6
Confidentiality
1. Each Participating Member State shall undertake to observe the confidentiality and secrecy of documents, information and other data received from, or supplied to other Participating Member States during the period of the implementation of this MOU.
2. Each Participating Member State shall not:
(a) directly or indirectly disclose any confidential information provided by other Participating Member States; nor
(b) use confidential information provided by another Participating Member State for any purpose other than for those specified in this MOU without the prior authorisation of such Participating Member State.
3. Participating Member States agree that paragraphs 1 and 2 of this Article shall continue to be binding among them, notwithstanding the suspension or termination of this MOU.
Article 7
Consultation
Any difference or dispute among the Participating Member States concerning the interpretation and/or implementation and/or application of the provisions of this MOU shall be settled amicably through consultation and/or negotiation among the Participating Member States.
Article 8
Amendments
1. Any Participating Member State may propose any amendment to the provisions of this MOU and its Annex. Such amendment shall be effected by written consent of all Participating Member States at the level of their representatives to the SEOM and a certified true copy of the amended MOU shall be furnished to each Participating Member State.
2. Any amendment to this MOU shall not prejudice the rights and obligations of the Participating Member States established
under this MOU before or up to the effective date of such amendment, except by agreement of all Participating Member States.
3. The effective date of such amendment shall be the date of the written consent, referred to in paragraph 1, of all Participating Member States.
Article 9
Accession
Non-participating ASEAN Member States may accede to this MOU at any time subject to the agreement of the Participating Member States at the level of their representatives to the SEOM. This MOU shall enter into force for the acceding ASEAN Member States upon the deposit of their instruments of ratification or letters of acceptance with the Secretary-General of ASEAN, who shall promptly inform each Participating Member State of such deposit.
Article 10
Final Provisions
1. This MOU shall be deposited with the Secretary-General of ASEAN, who shall promptly furnish a certified true copy to each Participating Member State.
2. This MOU is subject to ratification or acceptance by all Participating Member States. The instruments of ratification or letters of acceptance shall be deposited with the Secretary-General of ASEAN, who shall promptly inform each Participating Member State of such deposit.
3. This MOU shall enter into force upon the deposit of instruments of ratification or letters of acceptance by all Participating Member States with the Secretary-General of ASEAN.
4. This MOU shall remain in force unless terminated by all Participating Member States.
5. This MOU may be terminated at any time by written agreement of all Participating Member States. The termination of this MOU shall not prejudice the rights and obligations of all Participating Member States established under this. MOU before or up to the effective date of termination, except by agreement of all Participating Member States.
IN WITNESS WHEREOF, the undersigned, being duly authorised by their respective Governments, have signed this MOU on the second pilot project for the implementation of a regional self-certification system within the AFTA.
DONE at Siem Reap, this 29th day of August in the Year Two Thousand and Twelve, in a single original copy in the English Language.
For the Government of the Republic of Indonesia:
(Sgd.) GITA IRAWAN WIRJAWAN
Minister of Trade
For the Government of the Lao People s Democratic Republic:
(Sgd.) NAM VIYAKETH
Minister of Industry and Commerce
For the Government of the Republic of the Philippines
(Sgd.) GREGORY L. DOMINGO
Secretary of Trade and Industry
ANNEX
OPERATIONAL CERTIFICATION PROCEDURE
For the purpose of implementing the Rules of Origin set out in Chapter 3 (hereinafter referred to as ASEAN ROO ) of the ASEAN Trade in Goods Agreement (hereinafter referred to as the Agreement or ATIGA ) for the implementation of a Pilot Project towards the development and operationalization of an ASEAN Self-Certification Regime, the following operational procedures shall be observed on:
(a) the issuance of the Certificate of Origin (Form D);
(b) the Certified Exporter regime and its inherent Invoice Declaration;
(c) the verification of Certificates of Origin (Form D) and Invoice Declarations; and
(d) other related administrative matters.
Rule I
Definitions
For the purposes of this Annex:
(a) back-to-back Certificate of Origin means a Certificate of Origin issued by an intermediate exporting Member Stale based on the Certificate of Origin issued by the first exporting Member State;
(b) exporter means a natural or juridical person located in the territory of a Member State where a good is exported from by
such a person;
(c) Certified Exporter means a producer duly authorized to make Invoice Declarations of a good exported;
(d) Invoice Declaration means a declaration as to the origin of the goods exported made by a certified exporter on an invoice, in accordance with Rule 12B;
(e) importer means a natural or juridical person located in the territory of a Member State where a good is imported into by such a person;
(f) competent authority means the Government authority of the exporting Member State designated to: (i) issue a Certificate of Origin (Form D), (ii) authorize certified exporters, and (iii) exercise rights under Rules 12 A (2)(a), Rule 12C and Rule 18; and
(g) producer means a natural or juridical person who carries out activities as set out in Paragraph (j). Article 25 of the Agreement in the territory of a Member State.
Rule 2
Specimen Signatures and Official Seals of the Competent Authorities;
List of Certified Exporters
1. Each Member State shall provide a list of the names, addresses, specimen signatures and specimen of official seals of its competent authorities, in hard copy and soft copy formats, through the ASEAN Secretariat for dissemination to other Member States in soft copy format. Any change in the said list shall be promptly provided in the same manner.
2. The specimen signatures and official seals of the competent authorities, compiled by the ASEAN Secretariat, shall be updated annually. Any Certificate of Origin (Form D) issued by an official not included in the list referred to in paragraph 1 shall not be honoured by the receiving Member State.
3. Immediately after the grant of Certified Exporter status, each Member State shall communicate to the ASEAN Secretariat, in soft copy format:
(a) Legal name of the company;
(b) Registration of the company;
(c) Location of the company;
(d) List of the authorized signatories and their respective specimen signatures, not exceeding three (3) persons per company;
(e) Authorization code issued by the competent authorities, including date of issuance and expiry date of the authorization; and
(f) List of products for which Certified Exporters are authorised to make invoice declarations.
Withdrawal or suspension of authorizations should be provided in the same manner.
4. The ASEAN Secretariat shall promptly include the information in a database containing all Certified Exporters, which can be consulted online by Member States. The receiving Member State shall only accept Invoice Declaration made by an exporter and on a product included in the database.
Rule 3
Supporting Documents
For the purposes of determining originating status, the competent authorities shall have the right to request for supporting documentary evidence or to carry out check(s) considered appropriate in accordance with respective laws and regulations of a Member State.
Rule 4
Pre-exportation Verification for the issuance of a Certificate of Origin
1. The producer and/or exporter - other than a Certified Exporter - of the good, or its authorised representative, shall, with a view to the issuance of a Certificate of Origin (Form D), apply to the competent authority, in accordance with the Member State s laws and regulations, requesting pre-exportation examination of the origin of the good. The result of the examination, subject to review periodically or whenever appropriate, shall be accepted as the supporting evidence in determining the origin of the said good to be exported thereafter. The pre-exportation examination may not apply to the good of which, by its nature, origin can be easily determined.
2. For locally-procured materials, self-declaration by the final manufacturer exporting under this Agreement shall be used as a basis when applying for the issuance of the Certificate of Origin (Form D).
Rule 5
Application for Certificate of Origin
1. At the time of carrying out the formalities for exporting the products under preferential treatment, the exporter or his authorised representative shall submit a written application for the Certificate of Origin (Form D), together with appropriate supporting documents proving that the products to be exported qualify for the issuance of a Certificate of Origin (Form D).
2. A Certified Exporter may, at his own discretion, apply for a Certificate of Origin (Form D) in place of making out Invoice Declaration.
Rule 6
Examination of Application for a Certificate of Origin
The competent authority shall, to the best of its competence and ability, carry out proper examination, in accordance with the laws and regulations of the Member State, upon each application for a Certification of Origin (Form D) to ensure that:
(a) The application and the Certificate of Origin (Form D) are duly completed and signed by the authorized signatory;
(b) The origin of the product is in conformity with the provisions of the ASEAN ROO;
(c) The other statements of the Certificate of Origin (Form D) correspond to supporting documentary evidence submitted;
(d) Description, quantity and weight of goods, marks and number of packages, number and kinds of packages, as specified, conform to the products to be exported;
(e) Multiple items declared on the same Certificate of Origin (Form D) shall be allowed provided that each item qualifies separately in its own right.
Rule 7
Certificate of Origin (Form D)
1. The Certificate of Origin (Form D) must be on ISO A4 size white paper in conformity to the specimen shown in Annex 7 of the Agreement. It shall be made in the English language.
2. The Certificate of Origin (Form D) shall comprise one (1) original and two (2) carbon copies (Duplicate and Triplicate).
3. Each Certificate of Origin (Form D) shall bear a reference number separately given by each place or office of issuance.
4. Each Certificate of Origin (Form 0) shall bear the manually executed signature and seal of the authorized competent authority.
5. The original copy shall be forwarded by the exporter to the importer for submission to the customs authority at the port or place of importation. The duplicate shall be retained by the competent authority in the exporting Member State. The triplicate shall be retained by the exporter.
Rule 8
Declaration of Origin Criterion
To implement the provisions of Article 26 of the Agreement, the Certificate of Origin (Form D) issued by the final exporting Member State shall indicate the relevant applicable origin criterion in Box 8.
Rule 9
Treatment of Erroneous Declaration in the Certificate of Origin
Neither erasures nor superimpositions shall be allowed on the Certificate of Origin (Form D). Any alteration shall be made by:
(a) striking out the erroneous materials and making any addition required. Such alterations shall be approved by an official authorized to sign the Certificate of Origin s (Form D) and certified by the competent authorities. Unused spaces shall be crossed out to prevent any subsequent addition; or
(b) issuing a new Certificate of Origin (Form D) to replace the erroneous one.
Rule 10
Issuance of the Certificate of Origin
1. The Certificate of Origin (Form D) shall be issued by the competent authorities of the exporting Member State at the time of exportation or soon thereafter whenever the products to be exported can be considered originating in that Member State within the meaning of the ASEAN ROO.
2. In exceptional cases where a Certificate of Origin (Form D) has not been issued at the time of exportation or no later than three (3) days from the declared shipment date, due to involuntary errors or omissions or other valid causes, the Certificate of Origin (Form D) may be issued retroactively but no longer than one (1) year from the date of shipment and shall be duly and prominently marked Issued Retroactively .
Rule 11
Back-to-Back Certificate of Origin
The competent authority of the intermediate Member State may issue a back-to-back Certificate of Origin in an application made by the exporter, provided that:
(a) a valid original Certificate of Origin (Form D) is presented. In the case where no original Certificate of Origin (Form D) is presented, its certified true copy shall be presented;
(b) the back-to-back Certificate of Origin issued should contain some of the same information as the original Certificate of Origin (Form D). In particular, every column in the back-to-back Certificate of Origin should be completed. FOB price of the intermediate Member State in Box 9 should also be reflected in the back-to-back Certificate of Origin;
(c) For partial export shipments, the partial export value shall be shown instead of the full value of the original Certificate of Origin (Form D). The intermediate Member State will ensure that the total quantity re-exported under the, partial shipment does not exceed the total quantity of the Certificate of Origin (Form D) from the first Member State when approving the back-to-back Certificate of Origin to the exporters;
(d) In the event that the information is not complete and/or circumvention is suspected, the final importing Member State(s) could request that the original Certificate of Origin (Form D) be submitted to their respective customs authority;
(e) Verification procedures as set out in Rules 18 and 19 are also applied to Member State issuing the back-to-back Certificate of Origin.
Rule 12
Loss of the Certificate of Origin
In the event of theft, loss or destruction of a Certificate of Origin (Form D), the exporter may apply in writing to the competent authorities for a certified true copy of the original and the triplicate to be made out on the basis of the export documents in their possession bearing the endorsement of the words CERTIFIED TRUE COPY in Box 12. This copy shall bear the date of issuance of the original Certificate of Origin. The certified true copy of a Certificate of Origin (Form D) shall be issued no longer than one (1) year from the date of issuance of the original Certificate of Origin (Form D).
Rule 12 A
Certified Exporter
1. The competent authorities of the exporting Member State may authorise an exporter who makes shipments of products under the Agreement, hereinafter referred to as Certified Exporter , to make Invoice Declarations with regard to the originating status of the goods concerned. An exporter seeking such authorisation must apply in writing or electronically and must offer to the satisfaction of the competent authorities all guarantees necessary to verify the originating status of the goods for which an invoice declaration was made out.
2. The competent authorities may grant the status of Certified Exporter subject to any conditions which they consider appropriate, including in any case the following:
(a) The exporter must grant the competent authorities access to records and premises for the purpose of monitoring the use of the authorisation and of the verification of the correctness of declarations made out. The records and accounts must allow for the identification and verification of the originating status of goods for which an Invoice Declaration was made out, during at least three years from the date of making out the declaration in accordance with domestic laws and regulations;
(b) The exporter must undertake to make out Invoice Declarations only for goods such exporter produces and for which he has all appropriate documents proving the origin status of the goods concerned at the time of making out the declaration;
(c) The exporter must undertake to ensure that the person or persons responsible for making out the Invoice Declarations in the undertaking know and understand the Rules of Origin as laid down in the Agreement;
(d) The exporter accepts the full responsibility for all Invoice Declarations made out, including any misuse.
3. An authorisation shall be given in writing. The competent authorities shall grant the Certified Exporter an authorisation number which must be included in the Invoice Declaration. Member States shall communicate the authorisation granted to the ASEAN Secretariat, in conformity with Rule 2(3).
Rule 12 B
Invoice Declaration
1. The Certified Exporter shall in the case of export of goods satisfying the origin criteria of the Agreement, put the following declaration on the invoice:
The exporter of the product(s) covered by this document (Certified Exporter Authorization Code ) declares that, except where otherwise clearly indicated, the products (HS Code/s ) satisfy the Rules of Origin to be considered as ASEAN Originating Products under ATIGA (ASEAN country of origin: ) with origin criteria:
Signature over Printed Name of
the Authorized Signatory
2. The Invoice should describe the goods in sufficient detail to enable them to be identified for origin determination purposes.
3. The declaration on the invoice must be signed by hand, with the addition of the name of the authorized signatory.
4. The date indicated in the commercial invoice shall be considered as the issuance date of the Invoice Declaration.
5. If in case the space provided for in the Invoice Declaration is not sufficient to list out all the products, additional page/s could be attached, bearing the HS Codes, origin criterion and signature over printed name of the authorized signatory.
Rule 12C
Monitoring and verification
The competent authorities shall monitor the proper use of the authorisation, including verification of the correctness of Invoice Declarations made. Decisions on the frequency and depth of such actions should be risk-based. Furthermore, the competent authorities will act on retrospective verification requests by the customs authorities of the importing Member State, in conformity with Rule 18.
Rule12D
Withdrawal of the authorisation
The competent authorities may withdraw the authorisation at any time. They shall do so where the Certified Exporter no longer offers the guarantees referred to in Rule 12A(1), no longer fulfils the conditions referred to in Rule 12A(2) or otherwise abuses the authorisation. A withdrawal shall be immediately communicated to the ASEAN Secretariat, in conformity with Rule 2.
Rule 13
Presentation of the Certificate of Origin or the Invoice Declaration
1. For the purposes of claiming preferential tariff treatment, the importer shall submit to the customs authority of the importing Member State at the time of import:
(a) a Certificate of Origin (Form D) including supporting documents (i.e. invoices); or
(b) an Invoice Declaration made by a Certified Exporter.
2. In cases when a Certificate of Origin (Form D) is rejected by the customs authority of the importing Member State, the subject Certificate of Origin (Form D) shall be marked accordingly in Box 4 and the original Certificate of Origin (Form D) shall be returned to the competent authority within a reasonable period not exceeding sixty (60) days. The competent authority shall be duly notified of the grounds for the denial of tariff preference.
3. In the case where Certificates of Origin (Form D) are not accepted, as stated in the preceding paragraph, the importing Member State should accept and consider the clarifications made by the competent authorities and assess again whether or not the Form D application can be accepted for the granting of the preferential treatment. The clarifications should be detailed and exhaustive in addressing the grounds of denial of preference raised by the importing Member State.
Rule 14
Validity Period of the Certificate of Origin or the Invoice Declaration
The following time limit for the presentation of the Certificate of Origin (Form D) or the Invoice Declaration shall be observed:
(a) The Certificate of Origin (Form D) and the Invoice Declaration shall be valid for a period of twelve (12) months for origin certification purposes, from the date of issuance or - in the case of the Invoice Declaration - making out, and must be submitted to the customs authorities of the importing Member State within that period;
(b) Where the Certificate of Origin (Form D) or the Invoice Declaration is submitted to the customs authorities of the importing Member State after the expiration of the time limit for its submission, such-Certificate of Origin (Form D) or the Invoice Declaration is still to be accepted when failure to observe the time limit results from force majeure or other valid causes beyond the control of the exporter; and
(c) In other cases of belated presentation, the customs authorities in the importing Member State may accept such Certificate of Origin (Form D) or the Invoice Declaration provided that the goods have been imported before the expiration of the time limit.
Rule 15
Waiver of Proof of Origin
In the case of consignments of goods originating in the exporting Member State and not exceeding US$ 200.00 FOB, the production of a Certificate of Origin (Form D) or an Invoice Declaration shall be waived and the use of a simplified declaration by the exporter that the goods in question have originated in the exporting Member State will be accepted. Goods sent through the post not exceeding US$ 200.00 FOB shall also be similarly treated.
Rule 16
Treatment of Minor Discrepancies
1. Where the ASEAN origin of the goods is not in doubt, the discovery of minor discrepancies, such as typographical errors, between the statements made in the Certificate of Origin (Form D) or in the Invoice Declaration and those made in the documents submitted to the customs authorities of the importing Member State for the purpose of carrying out the formalities for importing the goods shall not ipso facto invalidate the document if it is duly established that the document does in fact correspond to the goods submitted.
2. In cases where the exporting Member State and importing Member Stale have different tariff classifications for a good subject to preferential tariffs, the goods shall be released at the MFN rates or at the higher preferential rate, subject to the compliance of the applicable ROO, and no penalty or other charges shall be imposed in accordance with relevant laws and regulations of the importing Member State. Once the classification differences have been resolved, the correct rate shall be applied and any overpaid duty shall be refunded if applicable, in accordance with relevant laws and regulations of the importing Member State, as soon as the issues have been resolved.
3. For multiple items declared under the same Certificate of Origin (Form D) or the Invoice Declaration, a problem encountered with one of the items listed shall not affect or delay the granting of preferential treatment and customs clearance of the remaining items listed in the Certificate of Origin (Form D) or the Invoice Declaration. Rule 18(c) may be applied to the problematic items.
Rule 17
Record Keeping Requirement
1. For the purposes of the verification process pursuant to Rules 18 and 19, the exporter applying for the issuance of a Certificate of Origin (Form D) and the Certified Exporter making out an Invoice Declaration shall, subject to the laws and regulations of the exporting Member State, keep the supporting records for not less than three (3) years from the date of issuance of the Certificate of Origin (Form D) or the Invoice Declaration.
2. The application for Certificates of Origin (Form D) and for the authorization of Certified Exporters, and all documents related, to such applications shall be retained by the competent authorities for not less than three (3) years from the date of issuance of certificate or of the granting of the authorisation.
3. Information relating to the validity of the Certificate of Origin (Form D) and to the correctness of an Invoice Declaration shall be furnished upon request of the importing Member State by the competent authority of the exporting Member State.
4. Any information communicated between the Member States concerned shall be treated as confidential and shall be used for the validation of Certificates of Origin (Form D) and Invoice Declarations purposes only.
Rule 18
Retroactive Check
The importing Member State may request the competent authority of the exporting Member State to conduct a retroactive check at random and/or when it has reasonable doubt as to the authenticity of the document or as to the accuracy of the information regarding the true origin of the goods in question, or of certain parts thereof. Upon such request, the competent authority of the exporting Member State shall conduct a retroactive check on a producer/exporter s cost statement based on the current cost and prices, within a six-month timeframe, specified at the date of exportation subject to the following conditions:
(a) The request for retroactive check shall be accompanied with the Certificate of Origin (Form D) or the Invoice Declaration concerned and shall specify the reasons and any additional information suggesting that the particulars given on the said Certificate of Origin (Form D) or the Invoice Declaration may be inaccurate, unless the retroactive check is requested on a random basis;
(b) The competent authority receiving a request for retroactive check shall respond to the request promptly and reply within ninety (90) days after the receipt of the request;
(c) The customs authorities of the importing Member State may suspend the provisions on preferential treatment while awaiting the result of verification. However, it may release the goods to the importer subject to any administrative measures deemed necessary, provided that they are not held to be subject to import prohibition or restriction and there is no suspicion of fraud;
(d) The competent authority shall promptly transmit the results of the verification process to the importing Member State which shall then determine whether or not the subject good is originating. The entire process of retroactive check including the process of notifying the competent authority of the exporting Member State the result of determination whether or not the good is originating shall be completed within one hundred and eighty (180) days. While awaiting the results of the retroactive check, paragraph (c) shall be applied.
Rule 19
Verification Visit
If the importing Member State is not satisfied with the outcome of the retroactive check, it may, under exceptional cases, request for verification visits to the exporting Member State.
(a) Prior to the conduct of a verification visit, an importing Member State, shall:
(i) Deliver a written notification of its intention to conduct the verification visit to:
(1) the exporter/ producer whose premises are to be visited;
(2) the competent authority of the Member State in whose territory the verification visit is to occur;
(3) the customs authority of the Member State in whose territory the verification visit is to occur; and
(4) the importer of the goods subject of the verification visit.
(ii) The written notification mentioned in paragraph (a)(i) shall be as comprehensive as possible including, among others:
(1) the name of the customs official issuing the notification;
(2) the name of the exporter/producer whose premises are to be visited;
(3) the proposed date for the verification visit;
(4) the coverage of the proposed verification visit, including reference to the goods subject of the verification; and
(5) the names and designation of the officials performing the verification visit.
(iii) Obtain the written consent of the exporter/ producer whose premises are to be visited.
(b) When a written consent from the exporter/ producer is not obtained within thirty (30) days upon receipt of the notification pursuant to paragraph (a) (i), the notifying Member State, may deny preferential treatment to the goods that would have been subject of the verification visit.
(c) The competent authority receiving the notification may postpone the proposed verification visit and notify the importing Member State of such intention. Notwithstanding any postponement, any verification visit shall be carried out within sixty (60) days from the date of such receipt, or for a longer period as the concerned Member States may agree.
(d) The Member State conducting the verification visit shall provide the exporter/producer whose goods are the subject of the verification and the relevant competent authority with a written determination of whether or not the subject goods qualify as originating goods.
(e) Any suspended preferential treatment shall be reinstated upon the written determination referred to in paragraph (d) that the goods qualify as originating goods.
(f) The exporter/producer will be allowed thirty (30) days, from receipt of the written determination, to provide in writing comments or additional information regarding the eligibility of the goods. If the goods are still found to be non-originating, the final written determination will be communicated to the competent authority within thirty (30) days from receipt of the comments/additional information from the exporter/producer.
(g) The verification visit process, including the actual visit and determination of whether the subject goods are originating or not, shall be carried out and its results communicated to the competent authority within a maximum of one hundred and eighty (180) days. While awaiting the results of the verification visit, Rule 18(c) on the suspension of preferential treatment shall be applied.
Rule 20
Confidentiality
Member States shall maintain, in accordance with their laws, the confidentiality of classified business information collected in the process of verification pursuant to Rules 18 and 19 and shall protect that information from disclosure that could prejudice the competitive position of the person who provided the information. The classified business information may only be disclosed to those authorities responsible for the administration and enforcement of origin determination.
Rule 21
Documentation for Implementing Article 32(2)(b)
(Direct Consignment)
For the purposes of implementing Article 32(2)(b) of the Agreement, where transportation is effected through the territory of one or more non-Member State, the following shall be produced to the Government authorities of the importing Member State:
(a) A through Bill of Lading issued in the exporting Member State;
(b) A Certificate of Origin (Form D) issued by the relevant Government authorities of the exporting Member State or an Invoice Declaration made out by a Certified Exporter established in the exporting Member State;
(c) A copy of the original commercial invoice in respect of the goods, where applicable; and
(d) Supporting documents in evidence that the requirements of Article 32(2)(b) paragraphs (i), (ii) and (iii) of this Agreement are being complied with.
Rule 22
Exhibition Goods
1. Goods sent from an exporting Member State for exhibition in another Member State and sold during or after the exhibition for importation into a Member State shall be granted preferential treatment accorded under this Agreement on the condition that the goods meet the requirements as set out in the ASEAN ROO, provided that it is shown to the satisfaction of the relevant Government authorities of the importing Member State that:
(a) An exporter has dispatched those goods from the territory of the exporting Member State to the Member State where the exhibition is held and has exhibited them there;
(b) The exporter has sold the goods or transferred them to a consignee in the importing Member State;
(c) The goods have been consigned during the exhibition or immediately thereafter to the importing Member State in the state in which they were sent for the exhibition.
2. For the purposes of implementing paragraph 1, the Certificate of Origin (Form D) or, in the case of a Certified Exporter, the Invoice Declaration, shall be provided to the relevant Government authorities of the importing Member State. The name and address of the exhibition must be indicated. The relevant Government authorities of the Member State where the exhibition took place may provide evidence together with supporting documents prescribed in Rule 21 (d) for the identification of the products and the conditions under which they were exhibited.
3. Paragraph 1 shall apply to any trade, agricultural or crafts exhibition, fair or similar show or display in shops or business premises with the view to the sale of foreign goods and where the goods remain under customs control during the exhibition.
Rule 23
Third Country Invoicing
1. Relevant Government authorities in the importing Member State shall accept Certificates of Origin (Form D) in cases where the sales invoice is issued either by a company located in a third country or by an ASEAN exporter for the account of the said, company, provided that the goods meet the requirements of the ASEAN ROO.
2, The exporter shall indicate third country invoicing and such information as name and country of the company issuing-the invoice in the Certificate of Origin (Form D).
Rule 24
Action against Fraudulent Acts
1. When it is suspected that fraudulent acts in connection with the Certificate of Origin (Form D) or the Invoice Declaration have been committed, the Government authorities concerned shall cooperate in the action to be taken in the respective Member State against the persons involved.
2. Each Member State shall provide legal sanctions for fraudulent acts related to the Certificate of Origin (Form D) and to the Invoice Declaration.